Constructed from aero grade aluminum alloy
HA III military grade hard-anodized finish
Waterproof and dustproof rating in accordance with IP68 (2 meters submersible)
Impact resistant to 1 meter
Specifications
Length: 177.5mm (6.99″)
Head Diameter: 65mm (2.56″)
Tube Diameter: 25.4mm (1”)
Tail Diameter: 28.5mm (1.12″)
Weight: 255.5g (9.01oz)
Accessories
NITECORE 21700 Rechargeable Li-ion Battery (NL2150HPi 5,000mAh),
Remote Switch RSW2i (Cable Part),
USB-C Charging Cable,
CR123 Battery Magazine,
Clip,
Spare O-ring,
Holster
Battery Options
The P30i is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123
batteries.
Note:
1. DO NOT attempt to use the P30i to charge CR123/RCR123 batteries.
2. The P30i is NOT compatible with conventional 21700/18650 batteries.
Technical Data
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO
FL1-2019, using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions. The data may vary in real world
use due to different battery usage or environmental conditions.
The runtime of TURBO is tested without the temperature regulation.
TURBO Availability: The TURBO level is only accessible when using a 21700 i Series battery with an output
over 15A. It is inaccessible when using CR123/RCR123 batteries.
Battery Installation
To Next Page
Loading...
Need help?
General