Operating Instructions
Battery Installation
Insert the battery(s) as illustrated and screw to tighten the tail cap.
Note: After the battery insertion, the head power indicator will flash to indicate the battery voltage. Please refer to the
“Power Indication” section of this manual for more details.
Warnings:
1. Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the
battery(s) is/are incorrectly inserted.
2. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
3. When the power level is low, please stop using the product and replace or recharge the battery to prevent
damage to the battery.
4. When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent
accidental activation or battery leakage.
5. DO NOT submerge the light into any liquid when it is hot.
Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside of
the tube.
Charging Function
The P30i is equipped with an intelligent charging system. As illustrated, after inserting the battery and tightening the
tail cap, use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices)
to the charging port to begin the charging process.
During the charging process, the tail power indicator will flash slowly to inform the user.
When the battery is fully charged, the P30i will cease the charging process and the tail power indicator will
become steadily turned on to inform the user.
When the charging status is abnormal (e.g. the battery is broken/inserted incorrectly), the P30i will cease the
charging process and the tail power indicator will flash quickly to inform the user.
The charging time for a 21700 Li-ion battery (5,000mAh) is approx. 4 hours. (Charged via the 5V/2A adapter)
To Next Page
Loading...
Need help?
General