FL1 STANDARD TURBO HIGH HIGH MID ULTRALOW
AUXILIARY LEDS
(CRI)
RED FLASHING RED SOS BEACON
550 Lumens 190 Lumens 33 Lumens
1
Lumens
19
Lumens
9
Lumens
9
Lumens
550
Lumens
550 Lumens
*1h 17h 50h 330h 25h 38h 45h – –
125m 77m 25m 5m 10m 7m – – –
3900cd 1480cd 150cd 8cd 23cd 14cd – – –
1m (Impact Resistant)
IP67 Rated
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/NEMA FL1, using the built-in Li-ion battery (3.7V 1,800mAh) under laboratory
conditions. The data may vary in real world use due to different battery usage or environmental conditions.
* The runtime for TURBO mode is tested without the temperature regulation.
Warranty Service
All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After
that, all defective/malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering
the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
* All images, texts, and statements specified herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on
www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the right to interpret and amend the content of this document at any time without prior notice.
Features
High-performance rechargeable headlamp
White and red dual outputs
A CREE XP-G3 S3 primary white LED capable of outputting 550 lumens
Two auxiliary LEDs with high color rendering capability: CRI 90 provides an output at 19 lumens
Red light illumination
Built-in 1800mAh Li-ion battery
USB rechargeable with onboard charging circuit
Dual switches design offers easy one-handed operation
4 brightness levels and 2 special modes available
A power indicator beneath switches indicates the remaining battery power (Patent No. ZL201220057767.4)
Flood beam profile with 60° adjustable angle
Made from durable PC materials
Compact and lightweight · Impact resistant to 1 meter
Specifications
Dimensions: 63mm×43.5mm×31.5mm (2.48″ ×1.71″ ×1.24″, bracket included)
Weight:76.4g (2.69oz, bracket included) 99.5g (3.51oz, bracket and head band included)
Accessories
USB Cable, Head Band
Operating Instructions
Dual Switches
The Power Button controls the white light, and the R Button controls the red light.
White Light Illumination
With the light turned off, press the Power Button to turn the white light on.
1. Within an interval of 3 seconds when the light is on, pressing the Power Button repeatedly to cycle through ULTRALOW-MID-HIGH-Standby.
2. Pressing the Power Button when no action is taken after 3 seconds will turn the light off.
Access to TURBO
With the light turned on, press and hold the Power Button for 1 second to enter TURBO mode (550 lumens). Note: NU32’s TURBO output diminishes after 30 seconds to prevent
overheating.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
