- GB -
ENGLISH
Attention!
Read the instructions carefully before use.
This manual contains information concerning proper and safe use of testing device. The manual is an
integral part of the device and must be kept throughout the entire service life of the device for future
consultation.
NITTY-GRITTY CUSTOMER CARE (+39 059 785210) is at your disposal for purchasing, installation and
technical informations.
1. TOOL OVERVIEW
PASSI TEST PLUS is an electrochemical testing device that provides a numeric value of the quality of the
protective chromium passive layer on stainless steel. The device provides within seconds a stable and
precise value related to the state of the passivation process.
2. TOOL FEATURES
PASSI TEST PLUS is built in compliance with established EU safety standards and bears the CE
mark.
2.1 COMPONENTS (FIG. 1 , PAG. 4)
1. PASSI TEST +: external unit;
2. PASSI TEST +: probe;
3. Battery Box (Rear Side);
4. 4 pin connector on external unit;
5. 4 pin connector on test probe;
6. 4 pin connection cable;
7. Refilling cartridge cap/ Cap placement;
8. Testing tip;
9. Cap;
10. Ground tip;
11. USB cable;
12. Calibration plate.
2.2 DATI TECNICI
2.3 INCLUDED IN THE KIT
Nr. 1 PASSI TEST PLUS
Nr. 1 4 pin connection cable
Nr. 1 USB Cable
Nr. 1 Calibration control plate
Nr. 1 Software CD
Nr. 1 Owner’s manual
Nr. 1 Spare testing tip
To Next Page
Loading...