NIZ Micro 84 - USB,PS;2 Interface settings; Clear Key Counter

mouse cursor the move a
cell.respectively,2/3/4/5points;corresponding
indicator flash 1-4 times;Shutdown memory
[{
Repeat Rate
4 gear to adjust the speed of key
hitting,respectively,×1,×2,×4,×8,corresponding
indicator flash 1-4 times;In USB/Bluetooth mode,×1
restore normal to send code,response delay
adjustment is invalid;Default in the first
gear;Shutdown doesn’t memory
]}
Response Delay
3 gear to adjust the keystroke response
delay,respectively,500,300,100ms,corresponding
indicator flash 1-3 times;Default in the first
gear;Shutdown doesn’t memory
Del
“M” Key
Press to exchange Office mode and Program
mode, ”M” Light turned on and off after 1 second at
Office mode, ”M” Light turned on and off after 10
seconds at Program mode. Shutdown memory
App
App Lock
Lock/Unlock App key;Disable in Mac OS;Shutdown
don’t memory.
↑
=
luminance +
Regulate the luminance of the indicator
↓
luminance -
Regulate the luminance of the indicator
L
FN+
R FN
Lock right FN
Long press 3 seconds for indicator flash 1times to
normal,indicator flash 2times to lock right FN(lock
right FN is exchange right FN layer and top
layer),indicator flash 3 times to lock left FN(lock left
FN is exchange left FN layer and top layer);Be
enable in program mode
Shutdown doesn’t memory,Top layer is none FN
layer
R
FN+
L FN
Lock left FN
※In program mode,the keyboard can be set 2 layer(left FN layer and right FN layer)
USB,PS/2 Interface settings
Press “Left FN /Right FN + Backspace” for 5seconds ,indicator flash 1 times to USB,
indicator flash 2 times to auto identify for USB,PS/2.and restart the keyboard.The
default settings is set to USB.
Clear Key Counter
Press “Left FN+Right FN + Delete” for 5seconds ,indicator flash,and the key counter
will be clear .