NIZ X108 - Bluetooth Operation Instruction; Bluetooth indicator instruction; Bluetooth pair instruction

F9
Adjust trigger
point
Adjustable Trigger point (high/fit/low stage) and
indicator flash 1/2/3 times,
Shutdown memory.Default in fit trigger point.
L-Ctrl
Caps/Ctrl
exchange
Press 3 seconds to Achieve the exchange between “left
Ctrl” and “Caps”. Shutdown doesn’t memory
Win
Win Lock
Press 3 seconds to Lock/Open Win,App key. Disable in
Mac OS;Shutdown memory
L-Alt
Win/Mac
Press 3 seconds for indicator flash 2 times,Match Mac
OS( Achieve the exchange between “left Win” and
“Left Alt”, “Right Alt be place of Right Win”,“Menu
be place of Right Alt”). Press 3 seconds for indicator
flash 1 times,match Win OS(key to return),Shutdown
memory
Delete
BD1
Long press 3s into pair status,BD1 led flash
quickly;short press into reconnect status,BD1 led flash
slowly;shutdown memory
End
BD2
Long press 3s into pair status,BD2 led flash
quickly;short press into reconnect status,BD2 led flash
slowly;shutdown memory
Page Down
BD3
Long press 3s into pair status,BD3 led flash
quickly;short press into reconnect status,BD3 led flash
slowly;shutdown memory
Insert
Bluetooth start
1.keyboard link to adapt :Start or close bluetooth
2.keyboard link to computer:Bluetooth mode/Wire of
USB swap,
※Press the ”M” Key to exchange Office mode and Program mode, ”M” Light turned off at
Office mode, ”M” Light turned on at Program mode. Shutdown memory.
Bluetooth Operation Instruction
Keyboard can be paired 3 Bluetooth devices, and keyboard can be connect to different
devices to achieve rapid connection by press the key. Keyboard reset and default to
connect the last use of the device. If the keyboard is in the state of cable, you can
switch to the Bluetooth state by FN+Insert; then one more time to click FN+Insert to
back to the cable mode.
1. Bluetooth indicator instruction:
The indicator flash quickly, into pairing status.
The indicator flash slowly, into reconnect status.
The indicator is always on, int connectted status .and after 5 seconds, the
indicator is put out.
2. Bluetooth pair instruction:
Before into pairing,need to close the bluetooth of device that has paired to the keyboard.
For example,After the completion of the Bluetooth 1 paired phone a, if you need to match the