19
Notes:
REMOVING the Thermicon
®
Tip
> Grasp the Tip by both sides.
> Gently pull the Tip out of the socket.
When to REPLACE the Thermicon
®
Tip
> If the inductor light turns red. See the
section on Troubleshooting for more
details.
> If Thermicon
®
Tip is no longer working
efficiently.
> If the wire is damaged in any way.
> If the Thermicon
®
Tip Icon is blinking
and no more bars appear on the
Status Screen.
> Make sure the Thermicon
®
Tip is
placed properly into the socket
before treatment.
> Never use a Thermicon
®
Tip if
the wire is bent or torn.
> Contact Customer Support
(page 34) for information
on obtaining a replacement
Thermicon
®
Tip for your device.
How to no!no!
®
To Next Page
Loading...
