To Next PageTo Next PageWhat to do if my Noblelift OPX15 truck is operating failure?
If your Noblelift Forklifts truck isn't operating, there are several potential causes. First, ensure the battery is fully charged and remove the main power plug. Check that the battery is correctly connected. Inspect and replace any faulty fuses. Also, make sure the emergency button is deactivated by inserting and pulling the knob.
Why Noblelift OPX15 load lifting failure?
If your Noblelift Forklifts is failing to lift loads, it could be due to several reasons. Ensure that the load weight does not exceed the maximum capacity specified on the ID-plate. Check if the battery is discharged and charge if necessary. Inspect and replace the lifting fuse if it has failed. Also, verify the hydraulic oil level and refill if it's too low. Finally, check for any oil leakage and repair the hoses or cylinder sealing if needed.
Why does my Noblelift OPX15 Forklifts truck only travels very slowly?
If your Noblelift Forklifts truck is moving very slowly, several factors could be responsible. Start by checking the battery indicator to see if the battery is discharged. Inspect the electromagnetic brake to ensure it is not engaged. Examine the tiller cables and connections for any damage or disconnections. If the electric system has overheated, stop using the truck and allow it to cool down. Lastly, check the heat sensor and replace it if necessary.
What to do if Noblelift Forklifts truck starts up suddenly?
If your Noblelift Forklifts truck starts up suddenly, it could be due to a damaged controller, which would need replacement. Alternatively, the accelerator might not be returning to its neutral position, requiring repair or replacement.
General
