Noblelift SPM1030 User Manual (English)

Questions and Answers:

B
Brenda KellyJul 31, 2025
What to do if the motor cannot run on Noblelift SPM1030 Forklifts?
- J
  Jeremy WilsonAug 1, 2025
  If the motor of your Noblelift Forklifts won't run, there are several potential causes: * The emergency switch may be pressed down, cutting off power. If this is the case, turn the switch clockwise to restore power. * The voltage might be too low, requiring you to charge the battery. * Loose electrical wire connectors could be the issue; ensure they are tightened. * The DC motor contactor may be broken, necessitating a replacement.
J
Jesse AustinAug 5, 2025
Why the forks cannot be lifted (Motor is rotary) in Noblelift Forklifts?
- C
  Courtney GomezAug 5, 2025
  If the forks on your Noblelift Forklifts cannot be lifted, but the motor is running, it could be due to a couple of reasons: * There may not be enough hydraulic oil. If this is the case, fill in the oil. * The oil might be contaminated. If the oil has impurities, change it.
S
sydney03Aug 8, 2025
What to do if the forks descend without the release valve worked in Noblelift Forklifts?
- D
  David GonzalezAug 9, 2025
  If the forks on your Noblelift Forklifts descend without the release valve being activated, it could be due to: * Impurities in the oil preventing the release valve from closing tightly. If this is the case, change the oil. * Worn or damaged sealing parts, which require replacement. * A damaged release valve, which also requires replacement.
K
Kristina TateAug 13, 2025
Why the forks cannot be descended in Noblelift SPM1030?
- C
  Christina CarterAug 13, 2025
  If the forks on your Noblelift Forklifts cannot be descended, consider these potential causes: 1. The piston rod or mast might be deformed due to overloading or uneven loading. If this is the case, replace it. 2. The forks may have been kept in a high position for an extended period, leading to rusting and jamming of the rod. To prevent this, keep the forks in the lowest position when not in use and lubricate the rod regularly. 3. The pump's release valve may not be open. Inspect it and replace it if damaged.
M
Mrs. Diana WilliamsAug 18, 2025
How to fix forks not lifting to maximum height on Noblelift SPM1030 Forklifts?
- D
  Dustin RussellAug 18, 2025
  If the forks on your Noblelift Forklifts cannot be lifted to their maximum height, it may be because the hydraulic oil level is insufficient. If this is the case, pour in the oil.