To Next PageTo Next Page
Need help?Do you have a question about the NOCO Genius GX2440 and is the answer not in the manual?
General| Input voltage | 100 - 240 V |
|---|---|
| Input frequency | 50/60 Hz |
| Battery capacity (max) | 425 Ah |
| Battery capacity (min) | 55 Ah |
| Product color | Black |
| LED indicators | Charging, Stand-by |
| Type | Indoor battery charger |
| Number of operation modes | 7 |
| Number of batteries supported | - |
| Compatible battery technologies | Lithium, Sealed Lead Acid (VRLA) |
| Efficiency | 92 % |
| Manual | Yes |
| Cables included | AC, DC |
Weight and Dimensions| Depth | 304 mm |
|---|---|
| Width | 215 mm |
| Height | 99 mm |
| Weight | 5987 g |
| Cable length | 2 m |
Read and understand safety information before use to avoid shock, explosion, or fire.
Always verify battery voltage and chemistry before charging.
For advanced AGM batteries needing higher voltage. Use with caution.
Battery recovery for sulfated or damaged batteries. May not recover all.
Identify positive (+) and negative (-) battery terminals correctly before connecting.
Connect positive clamp first, then negative. Disconnect in reverse order.
Verify connections, plug in AC, select mode via button press.
Error and Standby LEDs flash; blink sequence denotes error type.
Single flash (no charge), Double flash (short), Triple flash (high voltage).
Solid red error (reverse polarity), Solid orange standby (low voltage).
Checks battery condition (voltage, SOC, health) before charging.
Continuously monitors battery and restarts charge cycle as needed.
