Nokia 106 (2018) Korisnički vodič
Available security settings
You can edit the security settings depending on a setting. You can set them to be either on or
off, and check the status of the setting.
You can add phone numbers to a list to be blocked and create a closed user group.
1. Select Menu > > Security settings > Change access codes .
2. Select the code you want to change, for example, Change security code or
Change PIN code .
You need to have the current codes in hand to be able to change them.
MESSAGE SETTINGS
You can edit the message settings.
Message settings
Select Menu > > Message settings .
You can switch on or off settings, such as info service and delivery reports.
RESTORE FACTORY SETTINGS
You can restore factory settings in this setting. Be careful, however, since you lose all
personalization and all data you have added on the phone.
Reset your phone
Accidents may happen and your phone may stop responding. You can restore the original
factory settings, but be careful, since this reset removes all data you have saved in the phone
memory and all your personalization.
If you are disposing your phone, note that you are responsible of removing all private content.
You need to have the security code to restore the original settings. To reset your phone to its
original settings and to remove all your data, on the home screen, type in *#7370#.
1. Select Menu > > Restore factory set. .
2. Enter the security code. There is no more confirmation after you select OK , but the phone
is reset and all data is removed.
© 2023 HMD Global Oy. Sva prava zadržana. 24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
