Call functions
Copyright © 2004 Nokia. All rights reserved. 7
After the phone number has been 
assigned to a number key, you can 
speed dial the number in the 
following ways:
• Press the corresponding number 
key and then press   Call, or
•If Speed dialling is set to "on", 
press and hold the corresponding 
number key until the call is 
started (see ”Call settings” on 
page 21).
■ Answering a call
In standby mode, press   
Answer. To divert or reject the call 
without answering, press  . 
■ In-call operations
During a call, press   and   
Options for some of the following 
functions. Many of these are 
Network Services. Mute or Unmute, 
Hold or Unhold, New call, Answer, 
Reject, End call, End all calls, 
Contacts, Send DTMF, Swap, Menu 
and Flashlight on or Flashlight off.
■ Listening to voice 
messages
Voice mailbox is a Network Service. 
For more information and to receive 
your voice mailbox number, contact 
your service provider. To call your 
voice mailbox, press and hold   
in standby mode. To change the 
voice mailbox number, see ”Voice 
mailbox number” on page 16.
To divert calls to your voice mailbox, 
refer to ”Call settings” on page 21. 
■ Locking the keypad
The keypad lock prevents keys from 
being pressed accidentally.
To lock or unlock the keypad: In 
standby mode, press   Menu 
and then   quickly.
You can also set the phone to 
automatically turn on the keylock 
after a certain period of time. Refer 
to ”Keyguard settings” on page 23. 
When the keypad is locked, the 
indicator   is shown on the 
display.
Note: When keypad is 
locked, calls may be possible 
to the emergency number 
programmed into your 
phone (e.g. 112 or other 
official emergency number). 
Key in the emergency 
number and press   Call. 
The number is displayed only 
after you have keyed in its 
last digit.