Menu functions
22 Copyright © 2004 Nokia. All rights reserved.
• Line for outgoing calls: With this
Network Service, you can select
the phone line 1 or 2 for making
calls, or prevent line selection, if
supported by your SIM card.
Incoming calls can be answered
no matter which line you select.
However, you will not be able to
make calls if you select line 2
without subscribing to this
Network Service. When line 2 is
selected, "2" is shown on the
display in the standby mode.
Phone settings
Language: To select the language
for the display texts.
Cell info display: To set the phone to
indicate when it is used in a cellular
network based on Micro Cellular
Network (MCN) technology
(Network Service). For more
information, contact your service
provider.
Welcome note: You can key in a
message that will be shown briefly
on the display when the phone is
switched on.
Network selection: To set the phone
to automatically select a cellular
network available in your area, or
you can select the network
manually. The network you select
must have a roaming agreement
with your home network.
Confirm SIM service actions: To set
the phone to show or hide
confirmation messages when you
use the SIM card services (see ”SIM
services (Menu 11)” on page 27).
Enhancement settings
Enhancement settings menu is
shown only if the phone is or has
been connected to an enhancement
such as the headsets.
Press Menu, select Settings and
Enhancement settings. Select
Headset or Handsfree.
• Select Default profile to select
the profile the phone uses when
the aenhancement is connected.
• Select Automatic answer to set
the phone to automatically
answer an incoming call after
five seconds. If the Incoming call
alert is set to Beep once or Off,
automatic answer will not be
used.
• Select Lights to set the lights
permanently On. Select
Automatic to set the lights on for
15 seconds after a keypress. The
Lights option is available only
when Handsfree is selected.
To Next Page
Loading...
