Menu functions
24 Copyright © 2004 Nokia. All rights reserved.
• Security level: To set the phone
to ask for the security code when
a new SIM card is inserted in the
phone, Phone, or when you select
the phone’s internal phone book,
Memory.
Note that when you change the
security level, all the recent calls
lists, including missed calls,
received calls and dialled
numbers, are cleared.
• Change of access codes: You can
change the security code, PIN
code, PIN2 code, or barring
password. These codes can
include the numbers 0 to 9 only.
Avoid using access codes similar to
the emergency numbers, such as
112, to prevent accidental dialling of
the emergency number.
Restore factory settings
To reset some of the menu settings
to their original values. Press
Menu, select Settings and Restore
factory settings. Key in the security
code and press OK. The names
and phone numbers saved in the
phone book are not deleted.
■ Alarm clock
(Menu 7)
You can set the
alarm to sound at the time you want
just once, or repeatedly, for example
every working day.
Press Menu, select Alarm
clock. Key in the time for the alarm.
When the alarm sounds, you can
stop the alarm by pressing . If
you press Snooze, the alarm
stops and rings again in 6 minutes.
If the alarm time is reached while
the phone is switched off, the phone
switches itself on and starts
sounding the alarm tone. If you press
, the phone asks whether you
want to activate the phone for calls.
Press to switch off the phone
or Yes to make and receive calls.
Note: Do not press Yes
when wireless phone use is
prohibited or when it may
cause interference or
danger.
To Next Page
Loading...
