Change PIN2 Code (MENU 5 3 3)
To change your PIN2 code:
Press MENU 5 3 3,
key in the current PIN2 and press M,
key in the new PIN2 and press M,
key in the new PIN2 again and press M
Change Password (MENU 5 3 4)
A network password is required when you
wish to use the barring services of your net-
work. You can change the network pass-
word provided that the phone is registered
on the network.
Press MENU 5 3 4,
key in the current password and press M,
key in the new password and press M,
key in the new password again and press
M
Restore Settings (MENU 5 4)
You can reset the menu functions to the
original factory settings if you have lost
track of your customised settings. The
memory, timers, counters and language
are not reset.
Press MENU 5 4,
key in security code and press M
Call Info (MENU 6)
Call Timers (MENU 6 1)
The phone shows the duration of the last
call and the duration of all the calls (in
hours, minutes and seconds) made and re-
ceived after you last reset the timer. You
can set call duration timers to zero.
Inserting a new SIM card does not clear
the call timers.
➀
Press MENU 6 1.
➁
Press or to reach the option you
require
LAST:
indicates the duration of the last
or current call,
TOTAL:
indicates the duration of all the calls or
CLEAR TIMERS
sets both call timers to zero. You are
prompted to enter your security code,
SECURITY. Key in your security code,
and press M to confirm it.
Note:
The actual time invoiced for calls by your
service provider may vary, depending upon
network features, rounding-off for billing,
and so forth.
English
25 1998. Nokia Mobile Phones. All Rights Reserved.
To Next Page
Loading...
