Security Options (MENU 5)
PIN Code Request (MENU 5 1)
You can select whether or not the phone,
with the SIM card inserted, asks for the
PIN code when you switch the phone on.
However, the network operator may config-
ure the SIM card so that you can not dis-
able the PIN code request. If that is the
case, the message NOT ALLOWED will be
shown on the display when you select PIN
Code Request.
Key press sequency:
MENU 5 1, key in your PIN code, M,or
to select REQUEST ON or REQUEST
OFF, M
Security Level (MENU 5 2)
The phone can be set at two different secu-
rity levels. When the security level setting is
active, the security code will be required
whenever you insert a new SIM card.
➀
Press MENU 5 2.
➁
Key in your security code and press M
to confirm it.
➂
Press or to select a security level
option
NO SECURITY
no security code is needed when the
phoneisswitchedonwithanewSIM
card inserted.
PHONE SECURITY
the security code is required if you in-
sert a SIM card that the phone does
not recognise as an owner card. After
the correct security code is keyed in,
the card is recognised as an owner
card.
➃
Press M to confirm your choice.
When you change the security level, the list
of dialled calls, received calls and missed
calls will be erased.
Change Codes (MENU 5 3)
Change Security (MENU 5 3 1)
To change the security code:
Press MENU 5 3 1,
key in the current security code and press
M,
key in the new code and press M,
key in the new code again and press M
Change PIN Code (MENU 5 3 2)
When the PIN Code Request is set ON,
you can change your PIN code.
Press MENU 5 3 2,
key in the current PIN and press M,
key in the new PIN and press M,
key in the new PIN again and press M
If you have forgotten your PIN, use your
PUK code to enter a new PIN. See section
‘4. Getting Started - Access Codes’.
24 1998. Nokia Mobile Phones. All Rights Reserved.
To Next Page
Loading...
