Postcards
With the postcard messaging service (network service), create and send
postcards that may contain an image and a greeting text. The postcard is sent
to the service provider using multimedia messaging. The service provider prints
the postcard and sends it to the postal address given with the message. MMS
must be activated before this service can be used.
Before you can use the postcard service, you must subscribe to the service. To
check the availability and costs and to subscribe to the service, contact your
service provider.
To send a postcard, select Menu > Messaging > Create message >
Postcard. Fill in the address; mandatory editor fields are marked by a *. Scroll
to the image field, select Insert and an image from the gallery, or New
image to insert a recent image; then write your greeting text. To send the
message, select Send.
Flash messages
Flash messages are text messages that are instantly displayed upon reception.
Flash messages are not automatically saved.
Write a flash message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number and write your message. The maximum length of a
flash message is 70 characters. To insert a blinking text into the message, select
Options > Insert blink char. to set a marker. The text after the marker blinks.
To end the blinking text range, insert a second marker.
Read and reply to a flash message
A received flash message is indicated with Message: and a few words from the
beginning of the message.
To read the message, select Read.
Messaging
32
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 32 May 8, 2007 4:09:52 PM
To Next Page
Loading...
