Nokia 3109 classic - Settings; Software update settings and Restore factory settings

Software update settings
To allow or disallow software updates, select Menu > Settings >
Configuration > Device manager settings > Service provider software
updates and the following options:
• {No display_text mapping for 'qtn_list_allowremoteman',
locale='en'} — to perform all software downloads and updates
automatically
• {No display_text mapping for 'qtn_list_rejectremoteman',
locale='en'} — to reject all software updates
• {No display_text mapping for 'qtn_list_confirmremmanfirst',
locale='en'} — to perform software downloads and updates only after your
confirmation (default setting)
Request a software update
Select Menu > Settings > Phone > Phone updates to request available
software updates from your service provider. Select Current software
details to display the current software version and check whether an update
is needed. Select Download phone software to download and install a
software update. Follow the instructions on the display.
Install a software update
If the installation was canceled after the download, select Install software
update to start the installation.
The software update may take several minutes. If there are problems with the
installation, contact your service provider.
Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore factory sett.. Enter the security code.
The names and phone numbers saved in Contacts are not deleted.
Settings
63
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 63 May 8, 2007 4:09:52 PM