Nokia 3220 - Answering or rejecting an incoming call

Nokia 3220 User Guide 33 Copyright © 2004 Nokia
Phone menu
3 Select Find and the name and number that you want to assign.
If the 1-touch dialing function is off, the phone asks whether you want
to activate it. See also 1-touch dialing in “Call settings” on page 36.
To use 1-touch dialing, hold down the desired 1-touch dialing enter the
standby mode.
Voice dialing
To make a phone call, say a voice tag that has been added to a phone number.
Any spoken word, such as a person’s name, can be a voice tag. You can add up
to 10 voice tags.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are dependent on the
speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use
them in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar
names for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
ADD AND MANAGE VOICE TAGS
Save or copy the contacts to which you want to add a voice tag in to phone
memory. You can also add voice tags to the names in the SIM card. If you
replace your SIM card with a new one, you must delete the old voice tags before
you add new ones.
1 Scroll down in the standby mode to open your contact list.
2 Scroll to the contact to which you want to add a voice tag, and select Details.
3 Scroll to the phone number you want, and select Options > Add voice tag.
4 Select Start, and say clearly the words you want to record as a voice tag.
After recording, the phone plays the recorded tag. appears after the
phone number with a voice tag.
To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the
contact with the voice tag that you want, and press Select to see the options
to listen to, delete, or change the recorded voice tag.
MAKE A CALL
In the standby mode, press and hold the Right selection key. A short tone is
played, and Speak now is displayed. Say the voice tag clearly. The phone plays the
recognized voice tag and dials the voice tag phone number after 1.5 seconds.