Nokia 3320 - Save Calling Card Information (Step 2)

[ 43 ]
7
described in the following table.
7 Press Select.
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1 When prompted for the calling card’s access number, enter the
number and press OK.
This number is usually the 1-800 number that is listed on the calling
card.
2 When prompted to enter a calling card number (usually shown on the
front of the calling card) and PIN number, enter the number, and press
OK.
3 Press OK again when the Save changes? message appears.
4 Use [graphic] or [graphic] to scroll to Card name, press Select, and
enter the card name using your phone’s keypad.
Dialing sequence Use for cards that require you to
Access no.
+ phone no.
+ card no.
Dial 1-800 access number, then phone
number, then card number (+ PIN if
required).
Access no.
+ card no.
+ phone no.
Dial 1-800 access number, then card
number (+ PIN if required), then phone
number.
Prefix
+ phone no.
+ card no.
Dial the prefix (any numbers that must
precede the phone number) and phone
number you want to dial, then card
number (+ PIN, if required).