Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines
Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 11
DRAFT
18985
Together with major international telecommunications equipment companies,
Nokia has determined it is appropriate to use an EFUP of 50 years for network
infrastructure equipment and an EFUP of 20 years for handsets and accessories.
These values are based on manufacturers' extensive practical experience of the
design, manufacturing, maintenance, usage conditions, operating environments,
and physical condition of infrastructure and handsets after years of service. The
values reflect minimum values and refer to products operated according to the
intended use conditions. See “Hazardous Substances Table (HST)” for more
information.
2.2 Hazardous Substances Table (HST)
This section describes the compliance of the Nokia FastMile 4G Receiver equipment
to the CRoHS standard when the product and subassemblies contain hazardous
substances beyond the MCV value. This information is found in this user
documentation where part numbers for the product and subassemblies are listed. It
may be referenced in other documentation that describes the Nokia FastMile 4G
Receiver equipment.
In accordance with the People’s Republic of China Electronic Industry Standard
Marking for the Control of Pollution Caused by Electronic Information Products
(SJ/T11364-2006), customers may access the Nokia Hazardous Substance Table,
in Chinese, from the following location:
• http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRo
HS.pdf
2.3 Other environmental requirements
Observe the following environmental requirements when handling Nokia FastMile
4G Receiver equipment.
2.3.1 Environmental requirements
See chapter 16 in this document for more information about temperature ranges for
the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver
specifications.
To Next Page
Loading...
