Nokia 4G04-A - ESD Safety Guidelines; Environmental Requirements; Additional Information

Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines
Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 19
DRAFT
3.4 ESD safety guidelines
The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they
handle the Nokia FastMile 4G Receiver equipment.
Caution — This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
4G Receiver.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
3.5 Environmental requirements
See chapter 16 in this document for information about temperature ranges for the
Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver
specifications.
During operation in the supported temperature range, condensation inside the Nokia
FastMile 4G Receiver equipment caused by humidity is not an issue because the
Nokia FastMile 4G Receiver is a sealed unit.
3.6 Additional information
See chapter 17 for RF exposure information.