20
Clock
Your phone has an internal clock that
can be displayed on the start screen.
The clock must be set in order for call
times to be recorded (see ‘Call log’ on
page 41).
If you remove the battery for longer than a couple of seconds,
the time will be lost. The next time you turn on the phone,
you will be asked to enter the time.
For more information on automatic time update of the clock
in your phone, see page 21.
Selecting time format
Use
Menu
7 2 3 to set the clock’s format to
24-hour
or
am/pm
.
Setting the time
Use
Menu
7 2 2 to enter the current time. Use two digits for
both hours and minutes (for example, enter 1:30 as
0130
).
If the clock’s time format is set to
am/pm
, you will be asked
to choose
am
or
pm
.
Note: The key does not work on this screen. If you make
a mistake, re-enter all four digits.
Displaying or hiding the clock
Press
Menu
7 2 1 to display the clock on the phone’s screen
if it is currently hidden, or vice versa.
When the clock is displayed and the
time format is set to
am/pm
, a black
square will appear next to the time
indicating a.m. or p.m.
03:15
03:15
3:15 a.m.
3:15 p.m.
To Next Page
Loading...
