Nokia 5125 - Restore Factory Settings

37
Continuous
means the tone sounds for as long as you press
and hold the key.
Fixed
sets the tone length to one tenth of a second,
regardless of how long you press and hold the key.
Off
turns off touch tones. No tones will be sent when you
press the keys.
Setting automatic touch tone length
Use
Menu
4 2 1 2 to set the length of touch tones sent
automatically by the phone to
Short
(one tenth of a second)
or
Long
(half a second).
Saving touch tone strings
Touch tone strings can be used for sending and receiving
information with your phone. Save touch tone strings the
same way you save phone numbers (see page 16).
For example, you can save your office voice mailbox number
along with your password for easy access to your messages.
See ‘Special characters in phone numbers’ on page 12.
Sending touch tone strings
1
During a call, press to clear any numbers from the
display.
2
Press
Options
.
3
Scroll to
Touch tones
, then press
OK
.
4
Enter or find the touch tone string, then press
OK
.
Restore factory settings
You can use
Menu
4 2 3 to reset many of the settings in
your phone to their factory defaults (as in a new phone).
You will be required to enter the security code.
Note: The phone book, language setting, call timers, security
code, and lock code are not affected.