Nokia 5125 - 14 Security Features; Access Codes Overview; Lock Code; Security Code

58
14. Security features
Access codes overview
Access codes consist of the lock code and security code.
When you get your phone, you should change these codes
from their defaults, write down the new codes, and keep them
in a safe place away from the phone. Avoid using access
codes that are similar to emergency numbers, such as 911,
to prevent accidental dialing of the emergency number.
Lock code
Your phone’s lock code is used to lock and unlock your phone.
The default lock code is 1234. Use
Menu
4 3 2 3 to change
the lock code.
When the phone requires the lock code, it displays
Enter
lock code:
Enter the code, then press
OK
.
If you enter a wrong lock code five times in succession, your
phone prompts you for the security code.
Security code
The security code is required to restrict calls and to restore
factory settings. The default security code is 12345.
Use
Menu
4 3 2 4 to change the security code.
When the phone requires the security code, it displays
Security code:
Enter the code, then press
OK
.
If you enter an incorrect security code five times in succession,
the phone will not accept any input for the next five minutes.
Restricting calls
Use
Menu
4 3 1 to restrict outgoing or incoming calls.
This is handy if you want to lend your phone to someone but
don’t want them to make long-distance or other expensive
calls.