Nokia 5230
RM-588 / RM-593 / RM-594 / RM-629
Service Manual Level 1&2
15 Confidential • Copyright © 2010 NOKIA • All rights reserved Version 8.0
19) Unscrew the two TORX+ size 5 screws in the
order shown.
20) Lift up the LCD FRAME ASSY and the ENGINE
BOARD. Then remove the B-COVER.
21) Use the SS-93 to open the LCD FRAME ASSY
connector. While opening the connector, be careful
not to damage the connector
components!
22) Also, open the UPPER FLEX ASSY connector on
the top side of the phone with the SS-93. Be careful
not to damage the components nearby!
23) Turn over the ENGINE BOARD. Be careful not to
break the flex!
24) Open the locking mechanism of the LCD
connector. Be careful not to damage the
components nearby!
To Next Page
Loading...
