Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use. Hold the device at a short
distance away when you say the voice tag.
1. To start voice dialling, in the home screen, press and hold the call key. If a
compatible headset with the headset key is attached, press and hold the headset
key to start voice dialling.
2. A short tone sounds, and Speak now is displayed. Say clearly the name that is
saved for the contact.
3. The device plays a synthesised voice tag for the recognised contact in the
selected device language, and displays the name and number. To cancel the
voice dialling, select Quit.
If several numbers are saved for a name, you can say also the name and the number
type, such as mobile or telephone.
Video sharing
Use video sharing (network service) to send live video or a video clip from your
mobile device to another compatible mobile device during a voice call.
The loudspeaker is active when you activate video sharing. If you do not want to
use the loudspeaker for the voice call while you share video, you can also use a
compatible headset.
Warning: Continuous exposure to high volume may damage your hearing.
Listen to music at a moderate level, and do not hold the device near your ear when
the loudspeaker is in use.
Video sharing requirements
Video sharing requires a UMTS connection. Your ability to use video sharing depends
on the availability of the UMTS network. For more information on the service, UMTS
© 2010 Nokia. All rights reserved.40
To Next Page
Loading...
