Inserting a SIM card in the radio unit
9
©
2001 Nokia Mobile Phones. All rights reserved.
1. Getting Started
Your car phone consists of
two major parts:
1. Handset
2. Radio unit
Before you can use your car
phone, you must place a
SIM (Subscriber Identity
Module) card in the phone.
Your car phone has two SIM card readers: one in the radio unit
and the other in the handset. The factory setting assigns the
card reader in the handset priority; the car phone will only work
with the prioritised card (e.g. Phone book).
The user can change the priority of the card readers for use via
the menu, see “4-2-7 SIM card priority” on page 28. The user‘s
priority setting is then used as a default setting. If only one
reader is initially loaded with a card, that reader is automatical-
ly used.
If an invalid or corrupted SIM card is used in the prioritised card
reader, the user is notified through a message on the display.
The phone will not try to use a different card reader with a lower
priority. Switch off the car phone and remove the invalid SIM
card. Then restart the car phone. The car phone will then work
with the second SIM card.
Inserting a SIM card in the radio unit
The SIM card and the contacts stored in it can easily be dam-
aged if scratched or bent, so be careful when handling, inserting
or removing the card.
Before you insert the SIM card,
make sure that the car phone
has been switched off!
Insert the SIM card into the slot
so that the contacts are towards
the radio unit.
Inserting a SIM card in the handset
Warning! Keep all miniature
SIM cards out of the reach of
small children.
Before you insert the SIM card,
make sure that the car phone
has been switched off!
1. Press at least one push but-
ton of the cradle to lift off
the handset.
2. At the back of the handset,
push the cover for the SIM
card aside.
3. Insert the SIM card and close
the cover.
To Next Page
Loading...
