Nokia 6101 - Configuration

Settings
Copyright © 2005 Nokia. All rights reserved. 43
Select Menu > Settings >
Enhancements. You can select an
enhancement menu if the
corresponding enhancement is, or
has been, connected to the phone.
Depending on the enhancement,
select from the following options:
Default profile — to select the profile
that you want to be automatically
activated when you connect to the
selected enhancement
Automatic answer — to set the
phone to answer an incoming call
automatically after 5 seconds. If
Incoming call alert is set to Beep
once or Off, automatic answer is off.
Lights — to set the lights
permanently On. Select Automatic
to set the lights on for 15 seconds
after a key press
Text phone > Use text phone > Yes —
to use the text phone settings
instead of headset or loopset
settings
■ Configuration
You can configure your phone with
settings that are required for certain
services to function correctly. The
services are browser, multimedia
messaging, remote Internet server
synchronization, presence, and
e-mail application. Get the settings
from your SIM card, from a service
provider as a configuration message,
or enter your personal settings
manually. You can store
configuration settings from up to 20
service providers in the phone and
manage them within this menu.
To save the configuration settings
received by a configuration message
from a service provider, see
"Configuration settings service" on
page xi.
Select Menu > Settings >
Configuration and from the
following options:
Default configuration settings — to
view the service providers saved in
the phone. Scroll to a service
provider, and select Details to view
the applications that the
configuration settings of this service
provider support. To set the
configuration settings of the service
provider as default settings, select
Options > Set as default. To delete
configuration settings, select Delete.
Activate default in all applications —
to activate the default configuration
settings for supported applications
Preferred access point — to view the
saved access points. Scroll to an
access point, and select Options >
Details to view the name of the
service provider, data bearer, and
packet data access point or GSM
dial-up number.