Push to talk
60 Copyright
©
2005 Nokia. All rights reserved.
• To set the PTT settings for use,
select Push to talk settings.
• To set the required settings for
the PTT connection, select
Configuration settings.
• To open the browser and to
connect to the PTT network
portal provided by the service
provider, select Web.
■ Connect to and
disconnect PTT
To connect to the PTT service, select
Menu > Push to talk > Switch PTT
on. indicates the PTT connection.
indicates that the service is
temporarily unavailable. The phone
automatically tries to reconnect to
the service until you disconnect from
the PTT service. If you have added
groups to the phone, you are
automatically joined to the active
(Default or Listened) groups, and the
name of the default group is
displayed in the standby mode.
To disconnect from the PTT service,
select Switch PTT off.
■ Make and receive a PTT
call
Set the phone to use the loudspeaker
or earpiece for PTT communication.
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.
When connected to the PTT service,
you can make or receive dial out
calls, group calls or one-to-one calls.
One-to-one calls are calls you make
to only one person.
Make a dial out PTT call
For a dial-out PTT call you can select
multiple PTT contacts from the
contact list. The recipients get an
incoming call and need to accept the
call in order to participate. A dial out
call creates a temporary group and
the participants join this group only
for the duration of the call. After the
call the temporary dial out group is
deleted.
Select Menu > Push to talk >
Contacts list and mark the desired
contacts for the dial-out call.
The icon behind the contact in the
list denotes current login status: ,
, or indicate that the person is
either available, discreet, or not
available, indicates that the login
status is not available. The login
status is only available for
subscribed contacts. See "Subscribed
names" on page 32.
To Next Page
Loading...
