Menu functions
102
Copyright
© 2003 Nokia. All rights reserved.
Tip: To change the profile quickly in standby mode, press the power key
, scroll to the profile you want to activate and press Select.
Tone settings
Press Menu, and select Settings and then Tone settings. You can find the same
settings in the Profiles menu, see Profiles on page 101. Note that the settings you
make will change the settings in the active profile.
Select Incoming call alert to choose how the phone notifies you of an incoming
voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.
Select Ringing tone for incoming voice calls. To select ringing tones that have
been saved in the Gallery, select Open gallery from the ringing tone list.
Tip: If you receive a ringing tone via infrared connection or by
downloading, you can save the ringing tone in the Gallery.
Select Ringing volume and Vibrating alert for incoming voice calls and messages.
The vibrating alert does not work when the phone is connected to a charger, a
desktop stand, or a car kit.
Select Message alert tone to set the alert tone for the incoming messages, Keypad
tones, or Warning tones to set the phone to sound tones for, for example, when
the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone numbers that
belong to a selected caller group. Scroll to the caller group you want or All calls
and press Mark.
To Next Page
Loading...
