Nokia 6220 - Connectivity; Infrared

Menu functions
106
Copyright
© 2003 Nokia. All rights reserved.
Press Menu, and select Settings and Personal shortcuts. Select
• Right selection key to select the name for the right selection key displayed in
standby mode. Select an operator-specific name, Go to or Contacts.
• To select the functions for your personal shortcut list, select Select Go to
options and the list of available functions is shown.
Scroll to a function and press Mark to add it to the shortcut list. To remove a
function from the list, press Unmark.
• To rearrange the functions on the list, select Organise Go to options and a
function. Press Move and select where you want to move the function.
• Voice commands and select the command folder you want, scroll to the
command to which you want to add a voice tag. Press Options and select Add
command. If the command already has a voice tag, the indicator is shown.
To add a voice command, refer to Adding and managing voice tags on page 98.
To activate a voice command, refer to Making a call by using a voice tag on
page 99.
During a call or when an application using the (E)GPRS connection is sending
or receiving data, you cannot activate or add a voice command.
Connectivity
Infrared
You can set up the phone to receive data through its infrared (IR) port. To use an IR
connection, the device with which you want to establish a connection must be