Nokia 6220 - (E)GPRS Modem Settings; Call Settings

Menu functions
110
Copyright
© 2003 Nokia. All rights reserved.
(E)GPRS modem settings
You can connect the phone via an infrared or a data cable connection to a
compatible PC and use the phone as a modem to enable (E)GPRS connectivity
from the PC.
To define the settings for (E)GPRS connections from your PC, press Menu, and
select Settings, Connectivity, GPRS and GPRS modem settings.
• Select Active access point and activate the access point you want to use.
• Select Edit active access point to change the access point settings.
• Select Alias for access point. Key in the name you would like for the
activated access point and press OK.
• Select GPRS access point. Key in the Access Point Name (APN) to establish a
connection to a (E)GPRS network and press OK. Contact your network
operator or service provider for the APN.
You can also set the (E)GPRS dial-up service settings (Access Point Name) on your
PC using the Nokia Modem Options software, see PC Suite on page 163. If you
have set the settings both on your PC and on your phone, note that the PC’s
settings will be used.
Call settings
Press Menu, and select Settings and Call settings.
• Select Call divert (network service). With call divert, you can direct your
incoming calls to another number, for example, to your voice mailbox number.