Nokia 6220 - Page 67

Menu functions
67
Copyright
© 2003 Nokia. All rights reserved.
• Use SMTP authorisation. If your e-mail service provider requires
authentication for sending e-mails, set the setting to on. You must also
define your SMTP user name and SMTP password.
• SMTP user name. Key in the user name for outgoing e-mails that you
have obtained from your e-mail service provider.
• SMTP password. Key in the password for outgoing e-mails. If you have
not defined a password, you may be asked to define one when your
phone connects to your e-mail account.
• Include signature. Confirm your selection if you want to add a predefined
signature to your e-mail.
• Incoming (POP3/IMAP) server. Key in the e-mail server address for incoming
e-mail (either POP3 or IMAP4).
• Incoming (POP3/IMAP) port. Key in the port number that you have obtained
from your e-mail service provider.
• POP3/IMAP user name. Key in the user name to access the mailbox. If you
have not defined your SMTP user name, the e-mail server uses this user
name instead.
• POP3/IMAP password. Key in the password to access the mailbox. If you
have not defined your SMTP password, the e-mail server uses POP3/IMAP
password instead.
• Reply-to address. Key in the e-mail address to which you want the replies
to be sent, if it differs from your e-mail address.