©2000 Nokia Mobile Phones. All rights reserved.
Getting started
28
2. Remove the water resistant back cover by lifting it up.
3. Remove the BLL-2 battery if there is one.
Note: When removing the back cover and battery, do not tamper with
the other screws or the cover seals. If you do, you may invalidate the
warranty.
4. Open the SIM card holder by pressing the middle wires from sides
lightly and by releasing the card holder from its place.
5. Insert your SIM card ensuring that the bevelled corner is on the
bottom right and the golden contact area is facing downwards.
To Next Page
Loading...
