13Copyright © 2005 Nokia. All rights
General information
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to set the
phone to request the code, see Security p. 94.
If you enter an incorrect security code five times in succession, the phone ignores
further entries of the code. Wait for 5 minutes, and enter the code again.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See Security p. 94. The PIN code is usually supplied with
the SIM card. Set the phone to request the PIN code each time the phone is
switched on.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for
some functions.
The module PIN is required to access the information in the security module. See
Security module p. 136. The module PIN is supplied with the SIM card if the SIM
card has a security module in it.
To Next Page
Loading...
