87Copyright © 2005 Nokia. All rights
If you receive a call or a text message, or make a call during a packet data
connection, or indicates that the packet data connection is suspended (on
hold).
When needed to register and establish a packet data connection when an
application using packet data needs it, and to close the connection when you end
the application.
Packet data settings
You can connect the phone using Bluetooth wireless technology, infrared, or USB
data cable connection to a compatible PC and use the phone as a modem to
enable EGPRS connectivity from the PC.
To define the settings for EGPRS connections from your PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active access
point, and activate the access point you want to use. Select Edit active access
point > Alias for access point, enter a name to change the access point settings,
and select OK. Select Packet data access point, enter the access point name (APN)
to establish a connection to an EGPRS network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See Nokia PC Suite p. 140. If you
have set the settings both on your PC and on your phone, the PC settings are used.
To Next Page
Loading...
