33Copyright © 2005 Nokia. All rights
•If Speed dialling is set to On, press and hold a speed-dialing key until the call
begins. See Call p. 91.
Enhanced voice dialing
To make a phone call, select and hold Names and say the name of the contact you
wish to call. The phone will automatically associate a virtual voice tag with each
contact.
Make a voice dialing call
If an application is sending or receiving data using a packet data connection, end
the application before you use voice dialing.
Voice commands are language-dependent. To set the language, see Voice
playback language in Phone p. 92.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is
played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the
headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful, a list
with matches is shown. The phone plays the voice command of the match on
the top of the list. After about 1.5 seconds, the phone dials the number; or if
the result is not the correct one, scroll to another entry, and select to dial the
entry.
To Next Page
Loading...
