95Copyright © 2005 Nokia. All rights
PIN code request and UPIN code request — to set the phone to ask for your PIN or
UPIN code every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls from your
phone (network service). A barring password is required.
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — to set the phone to ask for the security code whenever a
new SIM card is inserted into the phone. If you select Security level > Memory, the
phone asks for the security code when the SIM card memory is selected, and you
want to change the memory in use.
Access codes — to change the security code, PIN code, PIN2 code, or barring
password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or user
certificates downloaded into your phone. See Certificates p. 136.
Security module settings — to view Security module details, activate Module PIN
request, or change the module PIN and signing PIN. See also Access codes p. 13.
To Next Page
Loading...
