6303 Classic RM-443
Service Manual Level 1&2
13 CONFIDENTIAL
6a) Use the SS-93 tool to release the clips, one on
each side.
6b) There are altogether 3 clips to be released.
Make sure you have released all of them before
proceeding.
7) Wedge the SS-93 tool under the A-COVER. Slide
the tool along the A-COVER to open the clips on
the top.
8) Open the clips on the other side as instructed
in the previous step.
9a) To release the A-COVER incl. KEYMAT ASSY lift
and slide the A-COVER up as shown.
9b) Remove the A-COVER.
Issue 2 Copyright © 2009 NOKIA. All rights reserved.
To Next Page
Loading...
