Making calls
22
Copyright © 2005 Nokia. All rights reserved.
Tip! With Nokia Video Call Stand PT-8, you can view your own image and the other
caller’s image from your phone display during a video call.
To be able to make a video call, you need to have a USIM card and be in the coverage of a
UMTS network. For availability of and subscription to video call services, contact your
network operator or service provider. A video call can only be made between two parties.
The video call can be made to a compatible mobile phone or an ISDN client. Video calls
cannot be made while there is another voice, video, or data call active.
1 To start a video call, enter the phone number in the standby mode, or go to Contacts,
and select a contact. Then select Options→ Call→ Video call.
2 Starting a video call may take a while. A note Waiting for image is shown.
If the call is not successful, for example, video calls are not supported by the network,
or the receiving device is not compatible, you will be asked if you want to try a normal
call or send a message instead.
3 The video call is active when you can see two video images and hear the sound through
the loudspeaker. The call recipient may deny video sending ( ), in which case you may
see a still image or no image at all. You will hear the sound.
Icons:
- the video call
recipient has denied video
sending from his device.
- you have denied
video sending from your
phone.
Select Enable/Disable: Sending video, Sending audio or Sending audio & video if you
want to change between showing video or hearing only sound.
Select Zoom in or Zoom out; or press and to zoom your own image. Zoom
indicator is shown on the top of the display.
4 To end the video call, press .
Note: Even if you have denied video sending during a video call, the call will still
be charged as a video call. Check the pricing with your network operator or service provider.
Tip! To speed dial a
number by pressing and
holding the key, press
and select Tools→
Settings→ Call and set
Speed dialling→ On.
Speed dialling a phone number
• To assign a phone number to one of the speed dialling keys ( - ), press
and select Tools→ Speed dial. is reserved for the voice mailbox.
• To call: In standby mode, press the speed dial key and .
Fig. 4 Making a video
call.
R0915_en.book Page 22 Tuesday, February 8, 2005 11:46 AM
To Next Page
Loading...
