Copyright
©
2005 Nokia. All rights reserved.
Make calls
26
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send
the tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Options during a video call
Select Options during a video call for the following
options: Hold or Disable (video, audio, or both), Activate
handset, Activate loudsp., or Activate handsfree (if a
compatible headset with Bluetooth connectivity is
attached), End active call, Use front camera/Use back
camera, Zoom in/Zoom out, and Help.
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialled calls, press , and select Connect. > Log > Recent
calls. The phone registers missed and received calls only if
the network supports these functions, the phone is
switched on, and within the network’s service area.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and
press .
Erasing recent call lists—To clear all recent call lists,
select Options > Clear recent calls in the recent calls
main view. To clear one of the call registers, open the
register you want to erase, and select Options > Clear list.
To clear an individual event, open a register, scroll to the
event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press , and select Connect. > Log > Call
duration.
To set the display of the call duration while a call is active,
select Connect. > Log > Options > Settings > Show call
duration. Select Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code, see "Security",
"Phone and SIM" on page 97.