Copyright
©
2005 Nokia. All rights reserved.
Connectivity
86
Icons for different devices:
Computer
Phone
Audio or video
Headset
Other
Checking the status of the Bluetooth connection
• When is shown in the standby mode, a Bluetooth
connection is active.
• When is blinking, your phone is trying to connect
to the other device.
• When is shown continuously, the Bluetooth
connection is active.
Pair devices
Tip! To define a short name (nickname or alias),
scroll to the device and select Options > Assign
short name in the paired devices view. This name
helps you to recognise a certain device during device
search or when a device requests a connection.
Paired devices are easier to recognise; they are
indicated by in the device search. In the Bluetooth
main view, press to open the paired devices view
().
To pair with a device, select Options > New paired device.
The phone starts a device search. Select the device.
Exchange passcodes. See step 4 in "Send data using a
Bluetooth connection" on page 85.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, but the connection remains
active.
To set a device to be authorised or unauthorised, scroll to
a device, and select from the following options:
Set as authorised—Connections between your phone and
this device can be made without your knowledge. No
separate acceptance or authorisation is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorised devices in the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To Next Page
Loading...
