Get started
Install SIM card and battery
Safe removal. Always switch the device off and disconnect
the charger before removing the battery.
This phone is intended for use with a BL-6Q battery.
Always use original Nokia batteries.
The SIM card and its contacts
can be easily damaged by
scratches or bending, so be careful when handling,
inserting, or removing the card.
1 Remove the back cover.
2 Insert the SIM card into
the slot with the contact
surface facing down.
3 Observe the battery contac
ts, and insert the battery.
4 Replace the back cover.
Insert a microSD card
Use only compatible microSD
cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards,
but some brands may not be
12 Get started
Cyan
To Next Page
Loading...
