fully compatible with this
device. Incompatible cards may
damage the card and the de
vice and corrupt data stored
on the card.
Your phone supports microSD cards of up to 8 GB.
1 Remove the back cover.
2 Insert the card into the mi
croSD card slot with the
contact surface facing down.
3 Replace the back cover.
Remove the microSD card
1 Remove the back cover of the device.
2 Pull the card out.
Charge the battery
Your battery has been partially
charged at the factory. If
the device indicates a low charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full charge, disconnec
t
the charger from the device, then from the wall outlet.
You can also charge the battery with a USB cable w
ith
power from a computer.
1 Connect the USB cable to a USB port of a computer a
nd
to your device.
2 When the battery is fully ch
arged, disconnect the USB
cable.
You do not need to charge th
e battery for a specific length
of time, and you can use the device while it is charging. I
f
the battery is completely disc
harged, it may take several
minutes before the charging indicator appears on
the
display or before any calls can be made.
Charging the device while list
ening to the radio may affect
the quality of reception.
Get started 13
Cyan
To Next Page
Loading...
