Write text
Traditional text input
indicates traditional text input.
and indicate the
uppercase and lowercase.
indicates the sentence case, that is, the
first letter of the sentence is written in
uppercase and all the other letters are
automatically written in lowercase.
indicates number mode.
To write text with the keypad, press a
number key, 2-9, repeatedly until the
desired character is displayed. There
are more characters available for a
number key than are printed on the
key. If the next letter is located on the
same key as the present one, wait until
the cursor is displayed, and enter the
letter.
To insert a number, press and hold the
number key.
To switch between the different
character cases and modes, press #.
To erase a character, press the clear
key. Press and hold the clear key to
erase more than one character.
To enter the most common
punctuation marks, press 1 repeatedly
until the desired punctuation mark is
displayed.
To add special characters, press and
hold *.
To insert a space, press 0. To insert a
line break, press 0 three times.
Predictive text input
1 To activate or deactivate
predictive text input, press # twice
quickly. This activates or
deactivates predictive text input
for all editors in the device.
indicates that predictive
text input is activated.
2 To write the desired word, press
the keys 2-9. Press each key once
for each letter.
3 When you have finished writing
the word, and it is correct, scroll
right to confirm it, or press 0 to
add a space.
If the word is not correct, press *
repeatedly to view the matching
words in the dictionary.
If the ? character is displayed after
the word, the word you intended
to write is not in the dictionary. To
add a word to the dictionary,
select Spell, enter the word (up to
32 letters) using traditional text
input, and select OK. The word is
added to the dictionary. When the
dictionary is full, the new word
replaces the oldest added word.
Write the first part of a compound
word; to confirm it, scroll right. Write
the second part of the compound
word. To complete the compound
word, press 0 to add a space.
Change the writing language
When you are writing text, you can
change the writing language. For
example, if you press the 6 key
repeatedly to reach a specific
character, changing the writing
language gives you access to
characters in a different order.
28 Write text
www.nokia.com/support
Cyan
Magenta
Yellow
Black
2010 Nokia. All rights reserved.
©
To Next Page
Loading...
