Nokia 6700 - Page 50

Tip: If you have sent data using
Bluetooth connectivity before, a
list of the previous search results is
displayed. To search for more
Bluetooth devices, select More
devices.
6 Select the device with which you
want to connect. If the other
device requires pairing before
data can be transmitted, you are
asked to enter a passcode.
When the connection has been
established, Sending data is
displayed.
The Sent folder in the Messaging
application does not store messages
sent using Bluetooth connectivity.
To receive data using Bluetooth
connectivity, select Bluetooth > On
and My phone's visibility > Shown
to all to receive data from a non-
paired device or Hidden to receive
data from a paired device only. When
you receive data through Bluetooth
connectivity, depending on the
settings of an active profile, a tone
sounds, and you are asked if you want
to accept the message in which the
data is included. If you accept, the
message is placed in the Inbox folder
in the Messaging application.
Tip: You can access the files in the
device or on the memory card using a
compatible accessory that supports
the File Transfer Profile Client service
(for example, a laptop computer).
A Bluetooth connection is
disconnected automatically after
sending or receiving data. Only Nokia
Ovi Suite and some accessories such as
headsets may maintain a connection
even if not actively used.
Pair devices
Select
> Settings >
Connectivity > Bluetooth.
Open the paired devices tab.
Before pairing, decide on your own
passcode (1-16 digits), and agree with
the user of the other device to use the
same code. Devices that do not have a
user interface have a fixed passcode.
You need the passcode only when you
connect the devices for the first time.
After pairing, it is possible to authorise
the connection. Pairing and
authorising the connection makes
connecting quicker and easier, as you
do not have to accept the connection
between paired devices every time you
establish a connection.
The passcode for remote SIM access
must have 16 digits.
1 Select Options > New paired
device. The device starts to search
for Bluetooth devices within
range. If you have sent data using
Bluetooth connectivity before, a
list of the previous search results is
displayed. To search for more
Bluetooth devices, select More
devices.
2 Select the device with which you
want to pair, and enter the
passcode. The same passcode
must be entered to the other
device as well.
3 Select Yes to make the connection
between your device and the other
device automatic, or No to confirm
the connection manually every
50 Connectivity
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
2010 Nokia. All rights reserved.
©