nokia
CONNECTING PEOPLE
PAGE 18 (28) Approved 1.0
Nokia Mobile Phones Customer Care EMEA
DJk
Technical Services, Repair Concepts Confidential 19.12.2003
9. KEYDOME EXCHANGE INSTRUCTIONS
Use SRT-6 to loosen the corner of the Keydome.
Note to not damage the LEDs. B-cover or Soldering Jig
can be used to fix the Power Board.
Tear off Keydome in diagonal direction to avoid
remains of glue. Check pads for cleanness.
Place a new Keydome on to the Assembly Jig. Note the
guiding pins.
Remove the protection foil. Do not touch the Keydome
from adhesive side.
Place the Power Board on the Jig. Note the guiding
pins.
This is the correct position of the Assembly Jig.
Carefully press-on the Power Board to the Keydome.
Check that the Keydome is correctly stuck to the Power
Board.
Service Manual 6820 Level 1&2 Copyright 2003 © Nokia Corporation
To Next Page
Loading...
