Copyright2004 Nokia. All rights reserved.
112
Sending and receiving data via IR
• Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices. The
preferable distance between the two devices in an infrared connection should
be one metre at most.
• To activate the IR port of your phone to receive data via IR, press Menu and
select Settings, Connectivity and Infrared.
• The user of the sending phone selects the desired IR function to start data
transfer.
If the data transfer is not started within two minutes after the activation of the IR
port, the connection is cancelled and has to be started again.
IR connection indicator
• When is shown continuously, the IR connection has been activated and
your phone is ready to send or receive data via its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.
Note that the IR connection deactivates automatically.
(E)GPRS
GPRS (General Packet Radio Service) is a network service that allows mobile
phones to be used for sending and receiving data over an Internet Protocol (IP)-
based network.
EGPRS (Enhanced GPRS), also known as EDGE (Enhanced Data Rates for Global
Evolution) is similar to GPRS but it enables faster connection. For more
To Next Page
Loading...
