Nokia 6820 - Restore Factory Settings; Gallery (Menu 5)

Menu functions
121
Copyright
2004 Nokia. All rights reserved.
Select Memory to set the phone to request the security code when the SIM
card’s memory is selected and you want to change the memory in use, see
Selecting settings for contacts on page 89, or copy from one memory to
another, see Copying contacts on page 98.
• Access codes to change the security code, PIN code, PIN2 code or barring
password. Codes can only include numbers from 0 to 9.
Restore factory settings
To reset the menu settings to their original values, press Menu and select Settings,
and Restore factory settings. Key in the security code and press OK. Note that the
data you have keyed in or downloaded, for example the names and phone
numbers saved in Contacts, are not deleted.
■ Gallery (Menu 5)
Note: Your phone must be switched on to use this
function. Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
In the Gallery menu you can manage images, photos, recordings, tones and video
clips that you have, for example, received in multimedia messages, see Reading
and replying to a multimedia message on page 63.
Your phone supports a usage rights system to protect acquired content. A piece of
content, for example a ringing tone, can be protected and associated with certain